Monday, 3 March 2008

Sticking the Rubber to the Rod


Here I started to assemble the rollers. As the 8mm tube was a loose fit I smeared a quarter of the rod with Evo Stick. I did this half the way down so that as the Rubber tube is slipped onto the rod (Using a twisting action) all of the Evo Stick is smeared inside the tube with non left to clean up by the time the rubber tube has made it to the end washer.

The Evo Stick helped slide the rubber onto the rod but when it has set will stop the rubber from turning on the rod.

Does all of this sound dodgy or do I need to get out more.

No comments: